MO740
Cam Sunhood
Cam Sunhood Attachment
Poor mans matte box
The cams I use are mostly table mounted. To avoid flares and reflections with the lights coming from the top, I gave some of my cams a small cap to shield them from undirected light. You can shoosed between a simple sunhood or one that can hold RGB-LED for a tally light option.
Assembly Parts:
Some are obligatory for the model to work, some are optional. It's up to you how close you will follow the instructions. Use what you have on hand and alter the model if necessary.
Part
Pieces
$ / € / ¤
M3x8 bolt
Standard M3x8 Hex Bolt
Holding the sunhood to the body
Source: local, ebay
2x
± 0.15
sum: 0.30
WS2812 RGB LED UNIT IN CM OPTIONAL
3Pin RGB LED strip width=~11mm
Can show Tally Lights statuses if you add an ESP
Source: ebay
3cm
± 0.30
sum: 0.90
Without optional parts =
1 (2 pcs)
~ 0.30
All parts =
2 (5 pcs)
~ 1.20
STL Files
Downloads and Purchases have been suspended as of 2024.
Thanks everyone for downloading! Feel free to build your own version of this ✌️
CC BY-NC-SA 4.0
